BendPak HD-7W | 4 Post Car Lift

7,000-lb. Capacity / Wide Car Lift / High Rise

The 7,000-lb. capacity HD-7W is ideal for shops that want the versatility to park sports cars, sedans, light-duty trucks and SUVs in the same structure. There's even enough side clearance to accommodate larger truck mirrors. Even so, this lift is only slightly larger than a typical parking space. Due to its reduced footprint, as well as its ability to house a variety of vehicle types in a low-ceiling garage, the HD-7W is an extremely attractive parking and maintenance solution for both homeowners and professional technicians.

Dependable design
The HD-7W features four stainless steel wire ropes, as well as a lone hydraulic cylinder that remains tucked underneath the runway. This powerful cylinder ensures you get a super-durable design that requires minimal maintenance over time.

Dual-hub wire rope sheaves
Larger wire rope sheaves prevent undue wear-and-tear on the four-post lift's axles, wire rope and even the sheaves themselves. Dual-hub and oversized sheaves provide a safer product that lasts longer and costs less to maintain. The larger the sheave, the less friction against the components, so we make every single sheave larger than necessary. Typically speaking, the bigger the lift, the bigger the sheave!

Multi-level locking positions
Parking and service height is totally up to you. Every few inches, the columns will automatically lock into place; simply lower the runways onto the lock as they move over it. Push-button controls will release all four locks together.

Secondary safety locks
A secondary lock system acts as a slack-cable device that catches the runways and keeps your vehicle level in case any dangerous cable slack develops. The lift will not be operational until you have a chance to resolve the issue.

Heavy-duty aircraft wire rope
Extremely powerful stainless steel wire ropes are rated at 14,400 lbs. each. They're called "aircraft quality" for a reason! The combined rating of these cables is more than 822% of the entire lift’s maximum lifting capacity, and all wire rope is fully enclosed within the lift structure.

Electric-hydraulic power system
A zero-service power unit is incorporated into the four-post lift structure. Dependable, long-lasting and extremely safe, it's always close at hand for your convenience.

Large base plates
10" x 12" base plates provide a stable yet minimal footprint for the HD-7W. Your four-post lift is as structurally sound as any car lift ever made.

Caster kit
A rugged, 4-piece caster kit makes your lift mobile, so you can get it out of the way for other service jobs or to simply park your vehicles in a different park of the garage. Foot-lock casters work with or without a vehicle raised on the runways.

Integrated design
For your safety and convenience, and to improve the aesthetics of your BendPak lift, the critical lifting components (e.g., airlines, safety latches and wire rope sheaves) are all fully enclosed within the columns of the lift.

Low-deck runways
Low-profile, 4.5" high runways make it easy to load vehicles onto the lift. Lower runways mean less time driving up the approach ramps; the result is a safer, easier approach.

Longer approach ramps
The effectiveness of the lowered runways is bolstered by gentle approach ramps that won't damage low-riding vehicles. Extended-length approach ramps permit drivers of all experience levels to load vehicles onto the runways without scratching the front ends of low-riding cars.

Features

• 7,000-lb. maximum lifting capacity
• Wide drive-thru with tall lifting height and short runways
• Runways include rail-kit for optional accessories
• Electric / hydraulic power system
• Single hydraulic cylinder mounted underneath runway
• Internal anti-sway slider blocks in each column
• Oversized self-lubricating cable rollers
• Features heavy-duty 3/8" aircraft cable
• Rugged 1.25" roller axles
• Multi-position safety locks in each column
• Adjustable lock ladders
• Ramps feature non-skid surface
• Push-button pneumatic safety release
• Optional 4,500-lb. capacity rolling jack available (Model RJ-45)

Capacity
Lifting Capacity* - 7,000 lbs. (3,175 kg)
*Max Capacity / Front Axle - 3,500 lbs. (1,588 kg)
*Max Capacity / Rear Axle - 3,500 lbs. (1,588 kg)

Rise
A - Min. Runway Height: 5" (127 mm)
B - Max. Rise: 82" (2,083 mm)
C - Max. Lifting Height: 86.5" (2,197 mm)
Time to Full Rise: 35 seconds

Outside Dimensions
D - Overall Width: 110.25" (2,800 mm)
E - Outside Length: 174" (4,420 mm)
F - Overall Length: 200.5" (5,093 mm)
G - Height of Columns: 100" (2,540 mm)

Inside Dimensions
H - Width Between Columns: 100.25" (2,546 mm)
I - Drive-Thru Clearance: 86.5" (2,197 mm)

Runways
J - Runway Width: 19" (483 mm)
K - Length of Runways: 158.25" (4,020 mm)
L - Width Between Runways: 35" (889 mm) or 41" (1,041 mm)
M - Runway Centerline: 56.75" (1,441 mm) or 63" (1,600 mm)
N - Outside Edge of Runways: 75.75" (1,924 mm) or 82" (2,083 mm)

Minimum Wheelbase
Rated Capacity: 115" (2,921 mm)
75% Capacity: 100" (2,540 mm)
50% Capacity: 85" (2,159 mm)
25% Capacity: 70" (1,778 mm)

Locking
Locking Positions: 17
Lock Spacing: Every 4" (102 mm)

Power Unit
Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 dB

Shipping
Weight: 1,756-lbs. (796 kg)
Dimensions: 167'' x 22'' x 28'' (4,242 mm x 559 mm x 711 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Manual

Concrete Slab Requirements

Click to Open and Download Concrete Slab Requirements (pdf)

BendPak strongly recommends consulting a Concrete Specialist early in your planning process for Lift installations. The recommendations presented in this document are generic in nature and cannot cover all situations. A Concrete Specialist will adjust these recommendations to account for national, state, and local building codes as well as local weather conditions, soil composition, base preparation, load bearing, seismic requirements, and any other structural concerns that may arise.

Existing concrete floors should be test drilled to verify minimum floor thickness and to confirm building drawings. A core sample should be obtained and tested to verify minimum floor compressive strength. When investigating floor properties, consult building drawings to verify proper floor reinforcement.

DO NOT install any BendPak lift on any surface other than concrete, conforming to the minimum compressive strength, aging, reinforcement, and thickness stated in the table above. ALL BENDPAK LIFTS MUST BE INSTALLED ON CONCRETE ONLY.

DO NOT install any BendPak lift on expansion seams or on cracked or defective concrete. All 3/4 inch diameter anchors must be a minimum of 6 inches away from any expansion seams, control joints or other inconsistencies in the concrete.

All anchors must be a minimum of 6" away from any expansion seams, control joints or other inconsistencies in the concrete. Refer to anchor manufacturer specifications for specific information concerning edge distances and bolt to bolt distance requirements.

NEVER install a BendPak lift on hand mixed concrete.

DO NOT install any BendPak lift on a secondary floor level or on any ground floor with a basement beneath without written authorization from the building architect and prior consultation and approval from BendPak.